The Rings Security Shutters & Gates Ltd roller shutter range has been developed to provide an architecturally acceptable physical barrier product which answers the growing need for protection against vandalism and burglary.

Further considering planning requirements for light transmission and vision to retail and commercial properties.

All shutters are manufactured to ensure full compliance with current British and European regulations.

The perforated steel roller shutter is a proven design which has for decades provided security for a wide range of applications.

Based upon the industrial type roller shutter lath, Rings Security Shutters & Gates Ltd can provide the perforated steel shutter in an up to date range of design.

Our configuration provides a strong secure shutter whilst still offering a see through transparent product, providing through vision for all types of retail and commercial applications.

Retail and commercial properties can benefit from the high security provided by the steel curtain, which is available in both a 50mm flat and 75mm curved profile.

The rolled steel side channels are available in varying sizes to offer enhanced security and the completed roller shutters are available in a wide variety of standard polyester powder coated finishes or PVC coated finishes. This allows the shutter to be colour coordinated with its surroundings.

Small size roller shutters are available in manual operation with sprung barrel operation, but the benefits of electrically operated shutters are recommended for ease of use and to prolong the life of the shutters over a long term with 5-year motor warranties available (Terms apply).

Retail/commercial shutters constructed from cold rolled 50mm flat profile or 75mm curved profile in 22 gauge (0.7mm) or 20 gauge (0.9mm) pre galvanized steel.

The laths are held in place via nylon end locks and are supplied with either a preformed T shaped or L shaped bottom rail.

All shutter curtains are assembled using nylon end locks to ensure the shutters operate freely with the minimum of friction within the shutter side guides.

The 50mm flat lath shutters are designed for smaller size applications up to 3m wide x 3m high.

We are able to offer the 75mm curved lath type for all sizes up to large span applications in the region of 11 metres wide, subject to suitability of site structures and logistics.